
25
2.2 Accessories / Spare parts
Fig. 2.
No. Part
Ordering No.
1. Hood SR 561
H06-5012
2. Hood SR 562
H06-5112
3. Hood SR 520 M/L
H06-0212
3. Hood SR 520 S/M
H06-0312
4. Hood SR 530
H06-0412
5. Hood SR 601
H06-5412
5. Hood SR 602
H06-5512
6. Face shield SR 570
H06-6512
7. Full face mask SR 200, PC-visor
H01-1212
7. Full face mask SR 200, glass visor
H01-1312
8. Full face mask SR 200 Airline, PC visor H03-1012
8. Full face mask SR 200 Airline, glass visor H03-1212
9. Half mask SR 900 S
H01-3012
9. Half mask SR 900 M
H01-3112
9. Half mask SR 900 L
H01-3212
10. Welding shield SR 592
H06-4412
12. Hose SR 550
T01-1216
12. Hose SR 551
T01-1218
13. Hose SR 951
T01-3003
14. Twin hose SR 952
R01-3009
15. Helmet with Visor SR 580
H06-8012
16. Steel net disc SR 336
T01-2001
17. Storage bag SR 505
T06-0102
18. Leather belt SR 503
T06-0103
18. Leather belt SR 503, Large
T06-0107
19. Belt SR 508
R06-0101
19. Rubber belt SR 504
T06-0104
19. Belt PVC
T06-0124
20. Gasket to fan
R06-0107
21. Harness SR 552
T06-0116
22. Particle filter P3 R, SR 710
H02-1512
3. Use
3.1 Installation
See also the user instruction for the head top.
3.1.2 Filters
Read carefully the user instructions accompanying the
filters.
Particle filter
The fan unit may be used with only particle filters P3 R
(PAPR-P3), model number SR 510 with filter adapter
or SR 710, which provides protection against all types
of particles, both solid and liquid.
Note!
• When filters are changed, both filters must be
changed at the same time.
Pre-filter
The pre-filters SR 221 protect the main filter against
excessively fast clogging. The pre-filter holders also
protect the main filters against handling damage.
3.2 Assembly
a) Battery
• Remove and charge the battery. Fig. 5, 6, 7.
The charger carries out charging automatically in
three stages. Fig. 8.
1. Orange LED.
2. Yellow LED.
3. Green LED.
• Put the battery back. Fig. 9.
Warning!
• Always recharge the battery before it has become
fully discharged.
• The charger may be used only for charging the
batteries for the SR 700.
• The battery may be charged only with a genuine
Sundström charger.
• The charger is designed only for use indoors.
• The charger must not be covered while it is in use.
• The charger must be protected against moisture.
• Never short circuit the battery.
• Never try to dismantle the battery.
• Never expose the battery to a naked flame. There is
risk of explosion/fire.
b) Belt
• Assemble the belt. Fig. 10, 11, 12.
Note!
Study the illustrations carefully to ensure that the belt
will not end up upside down or back to front.
c) Breathing hose
Read carefully the user instructions accompanying the
head top.
Full face mask SR 200
• Assemble the hose between Full face mask SR 200
and particle filter fan unit SR 700. Fig. 13, 14, 15.
• Check that the hose is firmly secured.
Half mask SR 900:
• Assemble the hose between half mask SR 900 and
particle filter fan unit SR 700. Fig. 16, 17.
• Check that the hose is firmly secured.
d) Particle filters
Two filters must always be used at the same time.
• Check that the gaskets in the filter mounting of the fan
unit are in place and are in good condition. Fig. 18.
• If particle filter SR 510 are used, snap it on the filter
adapter without pressing onto the centre of the filter.
• Screw the filter into the filter mounting so far that
the adapter will be in contact with the gasket. Then
turn it about 1/8 of a turn further in order to ensure
a good seal. Fig. 19.
e) Pre-filters SR 221
• Assemble the pre-filters. Fig. 20, 21.
f) Plug kit
The Plug kit is used for cleaning or decontamination of
the fan unit and prevents dirt and water from entering
the fan housing.
Disconnect the breathing hose and the filters and install
the plugs. Fig. 35.
3.3 Operation/performance
Display
Fig. 22.
a) Battery symbol that lights up with a yellow light when
the battery capacity is low.
b) Triangle that lights up with a red light if the air flow
should cease or if the filters are clogged.
c) Small fan symbol that lights up with a green light
during normal operation.
d) Bigger fan symbol that lights up with a green light
during boosted operation
Содержание H06-7010
