Sundown Audio SAX-100.2, Руководство пользователя

Страница: 10 / 12

SPEAKER OUTPUT
POWER
GND REM B+ FUSE
SPEAKER OUTPUT
POWER
GND REM B+ FUSE
Use 8 Gauge(AWG) wire cable
"MASTER UNIT"
"SLAVE UNIT"
++
--
2~8
ohms
Dual Amp Power and Speaker Connection
-10-
Dual Amp Power and Speaker Connection
SAZ-1500D
BATTERY
to REMOTE Turn-on
from HEAD UNIT
GROUND
To +12V DC
BATTERY
to REMOTE Turn-on
from HEAD UNIT
GROUND
To +12V DC
Using a dual amplifier configuration, the MASTER amplifier has total
control over the SLAVE amplifier. When using dual amplifier to
operate subwoofer, the positive terminal of the subwoofer's
voice coil must be connected to the positive terminal of the MASTER
Amplifier and the negative terminal of the subwoofer's voice coil must
be connected to positive terminal of the SLAVE Amplifier. Be advised
that the dual amplifier configuration has tremendous output potential,
so ensure that your subwoofers can handle such a large amount of
power.
When utilizing the dual amplifier configuration it is important
to note that the connected speaker load can be no lower
than 2 ohms. Connecting a lower impedance load can damage
the amplifier and void your warranty
Caution