3. Mounting Installation
Note: Please use the kit supplied for wall mounting on a solid wall or for portable use.
If mounted
onto other types of walls, you will need appropriate fixings (not supplied).
Please make sure the wall
is safe to mount.
We highly recommend to have the panel installed by a qualified electrician or
installer authorized by Sundirect.
The heater must be at least 20 cm removed from all objects, walls,
etc.; the distance to the floor must be at least 20 cm.
Step 1. Use the supplied
template to mark the position
of the holes on the wall.
Step 2.
Drill holes using a
8mm drill.
Step 3.
Insert the dowels into
the holes.
Step 4.
Screw in the supplied
screws to the wall.
Step 5. Mount the panel on
the screws.
Step 6. Move the panel to the
left and then down until it’s
secured.
For portable use, please install the feet on the bottom side of the heater.
Putting the heater on the floor directly will cover the air inlet and may cause
overheating.
5
