Sunday Electronics Technology Co., Ltd.
S-KW252TG Ver. A1 Page 3 of 6
STEP 2:
Connect the USB receiver to an open USB port on your computer or to a port on an additional USB hub. The
computer will prompt “find a new hardware”. This indicates that the receiver is connected and functioning.
STEP 3:
Remove the battery compartment lid behind the keyboard and insert two AAA batteries provided as shown below.
Please be careful not to load the battery incorrectly. There are guide marks inside the compartment to make sure
they are in the right direction.
STEP 4:
Please turn on the power switch
.
You are now ready to begin using your wireless keyboard
If you don’t want to use it, please turn off the power switch and unplug the dongle
Note:After 5 minutes non-operationm,the keyboard will go to sleep mode,Please press any key to work up.
5
.
Keyboard Button Functions