Email: [email protected]
Facebook: #SundayLiving
10
3. Heating
In standby mode, press the heating button to turn on heating.
In the standby state, press the heating button on the control panel or
remote control, the heating function H mode is turned on (H mode
indicator lights), press the heating button on the control panel or remote
control again, the heating function will switch to L mode ( The indicator
light also switches to L). Press the heating button on the control panel or
remote control again, the heating function is turned off, the indicator light
will also be turned off, and the fan will turn off after a delay of 30 seconds.
4. Timing
Press the timer button to set the on/off time.
In the shutdown state, press the timer button on the control panel or
remote control. After timing, the machine will enter the standby state at
the set time and turn on the flame function. Press the timer button on the
control panel or remote control in standby mode, the machine will shut
down at the set time. (The timer function is turned on every time you
press to increase 1 hour up to 24 hours, and after reaching 24 hours, press
again will change to 0 hour)
5. Increase the set temperature value
When pressing the Up button, the temperature increases
When you press the Up button on the remote control or the machine, you
can increase the set temperature value of the machine (59-95 degrees
fahrenheit)
6. Lower the set temperature value
When the Down button is pressed, the temperature decreases
When you press the Down button on the remote control or the machine,
you can reduce the set temperature value of the machine (59-95 degrees
fahrenheit)
