T
urn on the power switch first
，
“
O
”
= OFF
，“—”
ON
；
1.
Turn on the power switch, LED display “--”, the appliance is standby;
See picture 1.1
2. Press “
”as follows: ON (only Fan working), LED display
Environment temperature(default is
℉
after the power cut off);
OFF(Fan keep working for 30 seconds when shutdown the
appliance(after heating)
；
See picture 2.1
3. Press “
”, low heat(1000W), high heat(1500W), FAN working,
See picture 3.1-3.2
4. Press “
” to set timer, 1h
、
2h.....12h; See picture 4.1-4.4
5. Press “
”, SWING ON, SWING OFF, See picture 5.1
6. Press “
” to set temperature, Temperature range: 50-95
℉；
see picture 6.1-6.2
Press over 3s, switch to
℃
,
Temperature range:
10-35
℃
,
See picture
6.3-6.4.
Press over 3s again,
switch to
℉
.
When the power supply is not cut off, keep the Temperature mode
the same.
The
remote control can not switch the
Temperature mode, only can
switch on the machine.
7. For example, Environment temperature is 28
℃
(82
℉
). See picture
7.1
Set temperature is equal to or lower than Environment temperature,
appliance will stop heating. See picture 7.2-7.3
Set temperature is 1-2
℃
(1-4
℉
or 5
℉
) higher than Environment
temperature, appliance will low heat. See picture 7.4-7.5
Set temperature is higher or equal to Environment temp3
℃
(5
℉
or 6
℉
), appliance will high heat. See picture 7.6
Note:
℉
display will be
±
1
℉
deviation.
8.
When the appliance is tilted or the base is off the ground, then the
power cut off automatic.
9.
The operation method of the remote control is the same
Note: The indicator lights when corresponding function is working.
1.1
2.1
3.1
3.2
4.1
4.2
4.3
4.4
5.1
6.1
