Sundance Spas ALTAMAR, Руководство пользователя, Страница: 67 / 96

Page 61
880 SERIES
Note: Pressing will clear any current changes made. The days will
revert to the previous programmed setting. This feature can be used to
make corrections.
3. Tap to confirm and save your changes.
4. When the timer expires, a message will
appear on the control panel display, Figure
12.6j. Follow the previous instructions to
reset the timer. The filter must be replaced.
Refer to Section 13.1, page 66, for filter
location. If you tap “snooze” the message will
clear but the error icon will display and
the reminder screen will reappear in 10 days.
5. Tap to return to the “Water Care” Menu. Tap again to return to the
Settings Menu.
12.7 Optional Wi-Fi Setup
From the Settings Menu, tap or to highlight the “Wi-Fi” Menu tab.
Tap
Wi-Fi
to enter the programming options, Figures 12.7a and
12.7b. Make sure that you have downloaded the Wi-Fi App for this setup.
1. You need to follow the instructions from the App in order to connect
the Wi-Fi.
2. While the system attempts to connect you will see the, “Spa Wi-Fi
Setup in-progress,” Figure 12.7b. When the connection is done the
display will read, “Spa Wi-Fi Setup Successfully Connected.”
If the Wi-Fi connection setting should need to be
updated or connected to a new router, follow the
steps below.
1. From the “Settings” menu, tap
Wi-Fi
(Figure 12.7a) to enter the menu.
2. Tap
Reset?
Reset?
, Figure 12.7c. The display will
change to “Spa Wi-Fi Setup In-progress.”
3. Tap
Reset?
Reset?
again. This will clear the current
data and allow the spa to connect to the new data.
4. Reconfigure and setup your spa by following the instructions from
the app.
Filter 2 Replacement
Reminder
It’s time to replace your
MicroClean Inner filter.
Contact your authorized dealer
for a new filter.
Snooze Reset
Figure 12.6j
SETTINGS
Lock
Wi-Fi
Water Care
Wi-Fi Connect
Wi-Fi setup
in progress
Reset? Reset
A
A
A
A
Figure 12.7a
Figure 12.7b
Figure 12.7c
Wi-Fi Connect
Wi-Fi setup
in progress
Reset? Reset?
A
A