3.2
Preamp Tone Settings
These settings are merely a suggested starting point from which you can set
to your own personal taste.
Volume – 5 (adjust for desired loudness)
Treble – 7
Middle – 3
Bass – 5
Volume – 5 (adjust for desired loudness)
Treble – 7
Bass – 5
3.3
Specifications
Input Voltage – 9VDC
Current Consumption – 450mA
Input Impedance – 1Meg Ohm
Output Impedance – 600 Ohms
Dimensions – 7.4”W x 4.7”H x 1.3”D
Weight – 1.1lbs
3.4
Operating Instructions
•
Always connect your instrument input and preamp output prior to turning
the unit or pedal board ON.
•
Use only quality coaxial instrument cable (guitar cord) patching your
preamp to your amplifier.
•
Always connect the unit a proper power source and use a grounded outlet
strip, otherwise a shock hazard may result, especially when the unit is
connected to other equipment. Domestic 9VDC power adapters should be
connected to 115VAC, 60 Hz. Connection to improper line voltage may
cause permanent damage.
•
Do not expose this unit to rain or excessive moisture. This may cause a
shock hazard or damage to the unit.
