
2.6 Input Gain / Ch2 Boost Dip Switch
The Input Gain dip switch adds +10dB of gain to the first stage input buffer.
This adds more drive to both channels. The Ch2 Boost switch adds a +20dB
Mid/Treble boost to the clean channel for more tube like growl.
3.1
Operating Instructions
•
Always connect your instrument input and preamp output prior to turning
the unit or pedal board ON.
•
Use only quality coaxial instrument cable (guitar cord) patching your
preamp to your amplifier.
•
Always connect the unit a proper power source and use a grounded outlet
strip, otherwise a shock hazard may result, especially when the unit is
connected to other equipment. Domestic 9VDC power adapters should be
connected to 115VAC, 60 Hz. Connection to improper line voltage may
cause permanent damage.
•
Do not expose this unit to rain or excessive moisture. This may cause a
shock hazard or damage to the unit.
SAFETY NOTICE: There are no user serviceable parts inside the unit.
Refer servicing to qualified personnel only.
3.2
External Effects Patching
Bass Guitar > Envelope Filter > Flange > Chorus > B1p Input
B1p Send > Vol Pedal > Digital Delay > Noise Gate > B1p Return
B1p Output > Power Amplifier > Speaker