SunBriteTV SunBriteTV SB-CM46A12, Руководство по установке

Страница: 8 / 12

SB-CM46A12 Installation Instructions
8
3. While supporting both sides of display, align four mounting
buttons (M) on display or interface bracket with four
mounting holes on faceplate (G). (See Figures 10, 11 and
12)
Figure 10
WARNING:
DISPLAY WEIGHS IN EXCESS OF 40 LBS!
Always use two people and proper lifting techniques when
installing or positioning display.
4. Lower display into place listening for audible “click” to ensure
recessed area of mounting buttons (M) are properly seated
in lower area of mounting holes. (See Figures 10, 11 and 12)
Figure 11
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Ensure mounting
buttons are completely engaged in mounting holes.
NOTE:
Holes are provided in the faceplate for use with a
padlock or similar locking device, if desired. In addition,
the pin and nut may be removed from the upper holes
and moved to the lower holes for use as a more
permanent locking device. (See Figure 12)
Figure 12
Removing Display
1. Disconnect all power/audio/video cables.
2. Remove bolt or padlock from faceplate (if used).
(See Figure 13)
NOTE:
The pin may have been used as a more permanent
locking device. If so, remove nut and pin and move
from the lower holes to the upper holes.
3. Pull back on flag on upper mounting hole and press pin
down into “Open” position. (See Figure 13)
WARNING:
THE DISPLAY WEIGHS IN EXCESS OF 40
LBS EACH! Always use two people and proper lifting
techniques when installing or positioning display.
4. Carefully lift display from faceplate.
5. Lift up on pin and place flag back against faceplate to return
it to “Closed” position. (See Figure 13)
3
(G)
Display
Back of
display
(J) x 2
(M) x 4
(G)
4
5
May remove
pin and nut and
move to lower holes
A padlock or bolt
may be placed
through latch holes