SunBriteTV Pro 2 1K Series, Руководство оператора

Страница: 17 / 49

Page 16
TV Installation – Rear Panel Connection Diagrams
CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX (Continued)
1. Make sure the power of the TV and your DVD player is
turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video
connector to both your DVD player and Composite’s Yellow
Video connector port off the back of your TV.
3. Connect the white color connector to both your DVD player
and Composite’s white connector port off the back of your
TV.
4. Connect the red color connector to both your DVD player
and Composite’s red connector port off the back of your TV.
5. Turn on the TV and your DVD player.
6. Use the remote control’s source button or the source button
on the right side of the TV to switch to AV1 (CVBS).
Please Note :
7. Refer to the set-top box’s manual to make sure the set-top
box is configured to output correctly to the TV.
8. This model supports SONY’s universal remote code. If
SunBriteTV is not listed, please look up SONY’s codes in your
universal remote’s hand book.
9. This TV will turn off automatically if there’s no signal present
for more than 15 minutes.
Connecting with
Composite (Fair)