BEEPS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the
entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock (one
for hour and two for minutes).
3. Touch CLOCK pad again.
NOTE:
This is a 12 hour clock. When the oven is
first plugged in or when power resumes
after a power interruption, the display will
show ENTER CLOCK TIME, if you prefer
to not have the clock displayed, touch
RESET pad. You can check the clock
time while cooking is in progress by
touching the CLOCK pad.
SETTING THE OVEN TIMER
1. Touch
TIMER
pad.
2. Enter the amount of time you want to
count down by touching the number
pads. Digit time is in minutes and
seconds and set left to right. Set one
digit (a 5 for 5 seconds) or up to four
digits (2405 for 24 minutes, 5
seconds). The maximum number can
be entered is 99 min. 99sec.
3. Touch START/STOP pad.
NOTE:
Time countdown can be seen in
display for 3 seconds before clock or
cooking time is returned to display.
Touch TIMER and then touch RESET
to cancel TIMER during timing
process.
SETTING COOKING TIMES AND
POWER LEVELS
A. One-stage
Cooking
1. Use the number pads to set a
cooking time. You can set a
cooking time from one second to
99 minutes and 99 seconds. If you
are setting a time greater than one
minute, you must enter numbers
for both minutes and seconds. For
example: to set 20 minutes, enter
2,0,0,0.
2. If you want to set a power level
other than 100% power, touch
POWER, then use the number
pads to enter the power level. You
can set the power level from 1 to 9.
3. Touch START/STOP to start
cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
B. Two-stage
Cooking
Some recipes require different stages
of cooking at different temperatures.
9
