Before first use
Before using your electric blanket for the first
time, Sunbeam recommends that you switch
the blanket to maximum heat (setting 9) for
two to three hours to evaporate any moisture
in the mattress. Repeat this process every
few months to maintain a dry, healthy bed.
Your electric blanket control has nine heat
settings, which are recommended for use as
follows:
1-3 Low, gentle heat for all night use
4-6 Medium heat
7-9 High heat, for preheating only
Use the high heat settings to preheat your
bed only. Do not sleep with your blanket on
these settings for more than 30 minutes.
Using your 9 heat control with timer
Your timer control features a slide switch to
select the desired operating mode, plus an
easy to use dial to select the temperature
setting (see Figure 6). The heat setting dial is
illuminated for easy adjustment in the dark.
75 minute setting
Use the 75 minute setting to preheat your
bed before hopping in. Move the slide switch
to the 75min position. The temperature dial
will then illuminate enabling you to turn
the dial to your desired heat setting. The
timer indicator light (positioned next to the
slide switch) will go out, indicating that the
blanket is on and heating.
Your electric blanket will automatically switch
off after 75 minutes. The timer indicator
light will illuminate and the light in the
temperature dial will go out, indicating that
the timer period has elapsed and the blanket
is no longer heating.
To restart the timer, move the slide switch
to the OFF position and then return it to the
desired timer position.
Using your electric blanket
Figure 6.
1
14
