8
Using your 9 heat control with timer
BL51 Fitted
BL52 Waterproof
BL53 Antibacterial Series
Before first use
Before using your electric blanket for the first
time, Sunbeam recommends that you switch
the blanket to maximum heat (setting 9) for
two to three hours to evaporate any moisture
in the mattress. Repeat this process every
few months to maintain a dry, healthy bed.
Your electric blanket control has nine heat
settings, which are recommended for use as
follows:
1-3 Low, gentle heat for all night use
4-6 Medium heat
7-9 High heat, for preheating only
Use the high heat settings to preheat your
bed only. Do not sleep with your blanket on
these settings for more than 30 minutes.
Your timer control features a slide switch to
select the desired operating mode, plus an
easy to use dial to select the temperature
setting (see Figure 4). The heat setting dial is
illuminated for easy adjustment in the dark.
Figure 4.
