![background image](http://html1.mh-extra.com/html/sunbeam/sga9901/sga9901_user-manual_1394460008.webp)
7
Use single digits to set a cooking power level:
Number pad Cooking power
9
90%
8
80%
7
70%
6
60%
5
50%
4
40%
3
30%
2
20%
1
10%
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
1.
SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”. DO NOT TOUCH START/STOP.
2.
SET STAGE 2:
Touch COOK then enter proper cooking time and (lower) power level. (Most 2-stage recipes use lower power for
second stage.)
3.
Touch START/STOP.
NOTE:
·
After stage 1 time has elapsed, one signal sounds, signaling the beginning of stage 2.
·
After total time elapsed, the system will sound beeps with END in display. The beeps will continue to sound every two
minutes automatically until the door is opened or any pad is touched.
SPEED DEFROST
1.
Touch SPEED DEFROST.
2.
Enter desired defrosting time by touching correct number pads.
3.
Touch START/STOP.
NOTE:
·
After total time elapsed, the system will sound beeps with END in display. The beeps will continue to sound every two
minutes automatically until the door is opened or any pad is touched.
·
After setting SPEED DEFROST, oven can be programmed to automatically switch to one or two-stage cooking.
·
For speed defrost and one stage cooking, follow steps above. Before touching START/STOP, touch COOK, enter time
and power level and then touch START/STOP.
·
For speed defrost and two-stage cooking, follow steps above. Before touching START/STOP, enter two-stage cooking
programs.
OPERATION INSTRUCTIONS (continued)