6
Reversing the Door
This refrigerator has the capability to either open from the right or left side. The default door will
open from the left side. Should you wish to reverse the opening direction, follow the directions
below.
Note: All removed parts must be saved to reinstall the door.
To Reverse Refrigerator Door
1.
Remove the two screws (1) that hold the lower hinge (2) (right side) to the frame.
2.
Remove the left front leg (4) and transfer it to the left side.
3.
Lift the door and place it on a padded surface to prevent scratching.
4.
Remove the spring (5) located inside the upper right hole of the door and upper right pin
(6).
5.
Remove the plug button (7) from the upper left hole of the door and transfer it to the
uncovered hole at the right side. Be sure to press the button firmly into the hole.
6.
Insert the upper pin (6) previously removed from the right side and transfer it to the other
hole at the left side of the top frame.
7.
Insert the spring (5) previously removed inside the upper left side hole of the door.
8.
Set the door in its place making sure the pin (6) enters the bushing at the lower upper
frame section (hole).
9.
While holding the door in the closed position, secure the lower left hinge (2) previously
removed.
10.
Insert the two screws (1) previously removed and tighten them.
1.
Screw
2.
Low Hinge
3.
Adjustable Low Foot
4.
Adjustable High Foot
5.
Spring
6.
Door Pin
7.
Plug Button
