![background image](http://html.mh-extra.com/html/sunbeam/nbc1712g/nbc1712g_owners-manual_1393830023.webp)
21
Manual de usuario: parrilla de gas para exteriores, modelo NBC1712G 10/13/03
Si necesita ayuda llame al 1-800-762-1142
No devuelva el artículo al lugar de compra.
22
Owner’s manual: model NBC1712G outdoor gas grill 10/13/03
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Caution
All cleaning and maintenance
should be done when grill is
cool and with the fuel supply
turned off. DO NOT clean any
grill part in a self cleaning oven.
The extreme heat will damage
the finish.
Cleaning and care
Burning-off the grill after every use (approx. 15 minutes) will keep
excessive food residue from building up.
Recommended cleaning materials
Mild dishwashing detergent or baking soda.
Hot water
Nylon cleaning pad
Wire brush
Paper clip
Compressed air
Putty knife/scraper
DO NOT use cleaners that contain acid, mineral spirits or xylene.
Outside surfaces
The porcelain finish of the grill lid has a glass-like composition that should
be handled with care not to chip. Use mild dishwashing detergent or
baking soda and hot water solution. Non abrasive scouring powder can be
used on stubborn stains, then rinse with water.
If the inside surface of the grill lid has the appearance of peeling paint,
baked on grease buildup has turned to carbon and is flaking off. Clean
thoroughly with strong solution of detergent and hot water. Rinse with
water and allow to completely dry. NEVER USE OVEN CLEANER.
Interior of grill bottom
Remove residue using brush, scraper and/or cleaning pad, then wash with
dishwashing detergent and hot water solution. Rinse with water and let
thoroughly dry.
Plastic surfaces
Wash with a soft cloth and dishwashing detergent and hot water solution.
Rinse with water. Do not use abrasive cleaners, degreasers or a
concentrated grill cleaner on plastic parts.
Cooking Grid
Use mild dishwashing detergent and hot water solution. Non abrasive
scouring powder can be used on stubborn stains, then rinse with water.
Heat Plate
Clean residue with wire brush and wash with soapy water, then rinse with
water.