Sunbeam Maestro TA6420, Инструкция пользователя

Страница: 6 / 12

Plug the toaster into a 230-240 volt AC
power outlet and switch the power on.
Toasting Bread
1. Position the bread into the bread slot.
2. Select the desired browning setting
using the Electronic Browning Control by
pressing the buttons on the left hand side
of the LED panel up and down.
Note:
If toasting 1 slice (in the TA6240
Maestro 2) or 2 slices (in the TA6440
Maestro 4) it is recommended that you use
a lower browning setting to achieve your
required result and to prevent burning.
Important: Do not toast stale bread, rice
crackers or similar on a high setting as there
is a chance that they may catch fire.
3. Push the Toasting Lever down to
commence the toasting cycle.
4. The LCD screen will show how long the
toasting cycle will take and will count down
in minutes and seconds until the toasting
cycle has finished.
5. When the desired browning is achieved, the
toaster will beep once and automatically
stop toasting and pop the toast up.
6. If you need to remove the toast before the
cycle is complete, press the Cancel button
on the right hand side of the toaster next
to the toasting lever. The Cancel button
will immediately interrupt the toasting
cycle and pop the toast up.
7. The QuickCheck feature enables you to
check on the progress of your toast without
interrupting the toasting cycle. Simply lift
up the toasting lever to view the toast and
then release when you have finished. if
the toast is ready press the Cancel button.
8. To remove small pieces of toast, crumpets
or bagels, use the High-lift Lever to lift the
toast above the starting position. This will
prevent burning your fingers as you remove
the toast.
4
Using your Maestro Toaster
4