6
Always disconnect the kettle from the
power outlet before cleaning.
Never immerse the kettle switch area, cord
or power base in water, or allow moisture
to come into contact with these parts.
Removal of mineral deposits.
Mineral deposits in tap water may cause
the interior of the water gauge to discolour.
To remove this build-up, use Sunbeam
Liquid Descaler, a simple to use, non-toxic
cleaner available from Sunbeam Appointed
Service Agents.
Alternatively:
1.Fill the kettle with 3 cups of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
2.Empty the solution from the kettle. Fill the
kettle with clean water, bring to boil and
then discard the water. Repeat and the
kettle will then be ready to use.
To clean the polished exterior.
The stainless steel surface may be wiped
over with a damp cloth and polished with a
soft dry cloth.
CAUTION: Do not use chemical, steel wool,
or abrasive cleaners to clean the outside of
the kettle, as these will scratch the
stainless steel surface.
To clean the mesh filter.
Press the button at the top of the handle
to open the hinged lid. Grasp the top of
the scale filter and pull upwards to
remove. Wash in warm soapy water and dry
thoroughly before replacing in the kettle.
Care and Cleaning
