Using Your Heater
6
Switching the heater on
Place the heater on a flat level surface and
ensure that the air intake and outlet are clear
of obstructions.
Insert the plug into a 230/240V power outlet
and turn the power on.
Turn the thermostat dial to the Heating
setting by rotating the dial clockwise as far
as it will turn.
Turn the mode selector dial to the desired
heat setting, I or II.
Using the fan without heat
To use the fan without heat, set the thermo-
stat dial to the lowest setting and select the
fan setting on the mode selector dial.
1.
2.
3.
4.
•
Setting the thermostat
Set the thermostat to the Heating setting by
turning the dial clockwise as far as it will
turn.
The thermostat is now set and will
maintain the pre-set temperature level by
automatically switching the heater on and off
depending on the room temperature.
1.
3.
2. When the room has reached the desired
temperature level, turn the thermostat dial
anticlockwise to the Maintain Temp setting
until a click is heard. The heater will stop
operating.