5
HOW TO USE YOUR DRYER
With the control setting switch in the “Off” position, plug the Dryer into a
standard 125-Volt AC outlet. Select speed (airflow) setting that is most
appropriate to your needs and that will deliver the best results.
The control setting switch marked “Off”, “Low” – “High” controls the airflow
speed of your Hair Dryer. Press up on the switch until it clicks into position
LOW speed, press up once more until it clicks into position HIGH speed..
When finished using your Dryer, move the control switch to the “Off” position
and unplug the cord from the outlet.
ADDITIONAL INFORMATION
COOL SHOT BUTTON
(Refer to Diagram)
When drying hair use a higher heat setting and switch to a lower heat setting
when drying is nearly complete. To finish, press the Cool Shot Button. This will
deactivate all heat flow from the Dryer and blow cool air to lock in your hairstyle
without causing over-drying or damage to your hair.
CAUTION
Use your SUNBEAM
®
HOSPITALITY hair dryer with care. Directing a high volume
of heat continuously to one area can overheat hair and scalp. When using a “High”
heat setting, hold the blower opening a few inches away from the hair, drying one
section at a time. Work layers of hair in quick strokes. Keep the dryer in motion
until drying and styling are complete.
