5
1.Place the blender jug on the motor base.
The jug can be placed on the motor base
in 4 different positions, each being at 90°
degree angles, see figure 2.
2.Place ingredients into the jug.
Do not exceed the maximum indicated
level - 1.5 litres.
3.Place the measuring cup into the lid, see
figure 3a. Rotate the cup either clockwise
or anti-clockwise, this will lock the cup
into the lid, see figure 3b.
4.Place the lid with the measuring cup onto
the blender jug. Holding the measuring
cup, rotate the cup clockwise until you are
unable to turn it any further, see figure 4,
the lid is now locked in place.
5.Using the control dial, select the desired
blending speed, 1, 2 or PULSE.
Settings 1 and 2 will provide continuous
blending until the dial is turned to the OFF
position.
Further ingredients can also be added
whilst blending by removing the measuring
cup and pouring ingredients through the
hole in the lid.
6.After you have completed blending, turn
the dial to the ‘0’ position.
Note: When removing the blade assembly
from the jug you may need to slightly tilt
the blade so that it slides out easily. You
shouldn’t be forcing the blades out of the
jug, as this will ultimately damage the
blades.
Using your Sunbeam Fusion
Figure 2
Figure 3a
Figure 3b
Figure 4
