background image

4

Note:

 Before cleaning always remove the 

power cord from the power outlet.

Remove the juicing cones, stainless steel 
sieve and juicing container from the motor 
part of the base of the CitrusPress.
Clean all parts with warm soapy water. Rinse 

and dry thoroughly.

Note:

 For thorough cleaning of the anti-drip 

spout, it can be removed from the juicing 
container. This ensures that any residue 
remaining from the juice is removed.

Alternatively you can place these parts in the 

upper section of your dishwasher.

Clean the motor base of the CitrusPress with 
a damp cloth. Never use harsh cleaning or 
scouring agents. Never immerse in water or 

other liquids.

 

Before using your CitrusPress

Clean the juicing cones, stainless steel sieve 
and juice container in warm soapy water. 
Rinse and dry thoroughly. Alternatively you 

can place these parts in the upper section of 
your dishwasher.

Using your CitrusPress

1. Position the stainless steel sieve onto the 

juicing container and place onto the motor 

base.

2. Place the small juicing cone onto the drive 

shaft. If you are juicing larger citrus fruits, 
position the larger juicing cone over the 
smaller juicing cone so the large cone is 

sitting on top of the smaller cone.

3. Plug the power cord of the CitrusPress into 

a 230-240V AC power outlet and switch 

the power on.

4. Place a glass under the anti-drip spout.
5. To open the anti-drip spout, push it 

downwards to allow the juice to slow into 

the glass.

6. Cut the citrus segments in half, cutting 

across the segments.

Note:

 Before juicing we recommend that you 

roll the fruit on the bench whilst pressing 

down gently. This way you will obtain more 
juice. 
7. Press a fruit half onto the juicing cone – 

the CitrusPress starts automatically and 

stops when the fruit is removed.

8. Push the anti-drip spout upwards to stop 

the flow of juice, you can then remove or 
exchange the full glass with another – this 

ensures that the anti-drip spout does not 

allow the juice to continue to flow.

9. When the CitrusPress is no longer needed, 

remove the power cord from the power 

outlet and clean the CitrusPress – see 

“Care and Cleaning” below.

Care and Cleaning

Using your Sunbeam CitrusPress

Содержание CitrusPress JE2700









Отзывы: