CAPSULE button.
To indicate you have activated the
programmability of the steam pump rate, a
light on one of the buttons will illuminate;
1 CUP = Factory setting
2 CUP = -0.1 sec off
CAPSULE = -0.2 sec off
MANUAL = +0.1 sec off
POWER = +0.2 sec off
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The espresso
machine will then power on.
4. PRESS and RELEASE one of the buttons
below depending on the required steam
pump rate;
-0.1 sec = PRESS the 2 CUP button
(delivers a wet steam)
-0.2 sec = PRESS the CAPSULE button
(delivers a wetter steam)
+0.1 sec = PRESS the MANUAL button
(delivers a dry steam)
+0.2 sec = PRESS the POWER button
(delivers a dryer steam)
When the new pump rate setting has been
selected the espresso machine will beep
twice.
5. The espresso machine will then
automatically power on.
Resetting the Factory Settings
To revert back to the espresso machines
factory settings;
1. Ensure the espresso machine is plugged in
and switched on at the power outlet.
Note:
DO NOT press the POWER button on
the espresso machine.
2. PRESS and HOLD DOWN the MANUAL
button.
3. While still holding down the MANUAL
button, briefly PRESS and RELEASE
the POWER button and then release the
MANUAL button.
4. 4 beeps will sound and the machine will
power on.
Power Saving Mode
After 1 hour of non-use the espresso machine
will automatically switch to power saving
mode. Once the espresso machine is in
power saving mode all the lights on the
buttons will dim. While in power saving mode
the espresso machine powers down to 75%
of power. After a further 4 hours of non-use
the espresso machine will beep once and
then turn off.
The time of inactivity before the espresso
machine enters into power saving mode can
be adjusted if so desired;
1. Ensure the espresso machine is plugged in
and switched on at the power outlet.
Note:
DO NOT press the POWER button on
the espresso machine.
2. PRESS and HOLD DOWN the MANUAL
and CAPSULE buttons.
3. While still holding down the MANUAL
and CAPSULE buttons briefly PRESS and
RELEASE the POWER button and then
release both the MANUAL and CAPSULE
buttons.
Advanced Programming continued
+0.2 sec
off
+0.1 sec
off
Factory
Setting
-0.1 sec
off
-0.2 sec
off
18
