28
Descaling cycle
After continued use, your machine may
develop a build up of mineral deposits and will
require occasional descaling.
We recommend descaling your machine every
4-6 months, although this period will depend
on the hardness of water and frequency of
use.
Descaling solution
You have 2 options:
- Sunbeam Espresso Machine Descaling
Tablets (EM0010).
or
- Sunbeam Liquid Descaler (KE0100).
Sunbeam descaling solutions are available
for purchase from Sunbeam. Details are on
the back page.
Descaling cycle
The descaling cycle takes approximately 10
minutes to complete.
Preparing for descaling cycle
• Clean shower screen
- Using a screwdriver, unscrew the shower
screen from the underside of the group head
and clean under running water.
- Screw the shower screen back in position.
• Place containers
- Place a large container under the group
head and steam wand.
• Check power
Ensure that:
- The power plug is inserted into the outlet
and switched on.
- Rotate the steam lever to the ON position.
• Fill water tank with descaling solution
- Fill water tank with 3 litres of warm water.
- Add one Sunbeam Descaling Tablet or 2
capfuls of Sunbeam Liquid Descaler.
- Allow tablet or solution to fully dissolve.
- Insert the water tank into position.
• Access the descaling cycle
- Press and hold the 1 CUP and PROGRAM
buttons.
- Then press the STANDBY button and release
both the 1 CUP and PROGRAM buttons.
- The lights on the control panel will start to
chase from left to right.
Important:
If the descaling cycle is not
completed or stopped part way through
the process, the descaling cycle will need
to start again from the beginning.
Important:
The hot water lever must be in
the OFF position during descaling.
Note:
Do not press the STANDY button.
DUAL WALL
STEAM
FIL
TER
UNSCREW
INSERT
INSERT
ESPR
ESSO
MACHINE
CLEA
NING
TABL
ETS
ESPR
ESSO
MACHINE
CLEA
NING
TABL
ETS
