Owner’s Manual,
Model BC1912G Portable Gas Grill
BC1912G owner’s manual
8
fire
Observe Flame Height When lit:
Flame should be a Blue / Yellow
color Between1”– 2” High
2”
1”
0”
Assure that the regulator control knob is in
the “lock off” position when attaching the
propane cylinder to the regulator.
When lighting, turn control knob to the off
position, and push in to turn on. Please
refer to “lighting instructions,” above.
When turning gas off, push the regulator
control knob and turn to “OFF” position
IMPORTANT: Open lid prior to lighting grill. Attempting to light
the burner with the lid closed may cause an explosion! Make
sure there are no obstructions of airflow to the gas unit.
Spiders and insects can nest within and clog the burner /
venturi tube at the orifice. A clogged burner tube can lead to a
fire beneath the appliance. Clean burner holes with a heavy-
duty pipe cleaner. Make sure control knob is locked off. Place
a lighted match up through the hole in the bottom of the unit.
Turn the regulator valve to its “high” setting,. After lighting,
please observe the burner flame, make sure all burner ports
are lighted - a blue / yellow flame of 1-2 inches from the burner
rod should appear (refer to drawing). If burner does not light
after first try, turn the gas regulator to its “off” position and wait
5 minutes for gas to clear before trying again. If burner flame
goes out during operation, immediately turn the gas
“off” and
open lid to let the gas clear for about 5 minutes. Attempt to re-
light. Before cooking on this grill for the first time, operate the
grill for about 15 minutes with the lid closed and the gas turned
on “high.” This will “heat clean” the internal parts and dissipate
odor from the painted finish. Clean your grill after each use, DO
NOT use abrasive or flammable cleaners, as it will damage the
parts of this product and may start a fire. Clean with warm
soapy water.
Lighting Your Grill
