Sunbeam 4805, Инструкция

Страница: 3 / 12

SPECIAL INSTRUCTIONS
1. A short power supply cord has been provided to reduce the
hazard resulting from becoming entangled in or tripping over a
longer cord.
2. Extension cords may be used if care is exercised in their use.
3. If an extension cord is used, the marked electrical rating of the
extension cord should be at least as great as the electrical rating of
the appliance. The longer cord should be arranged so that it will not
drape over the counter top or
where it can be pulled on by
children or tripped over accidentally.
Congratulations! You are now the owner of a Sunbeam Pie
The 101 Pie Ideas are just a start. Be creative and you can turn fresh, frozen, canned
ingredients, or left overs into delicious meals.
1. Open the unit by releasing the securing latch and lifting the upper handle.
2. Before using for the first time, clean cooking plates with cloth or sponge, dampened
with hot, soapy water. DO NOT IMMERSE UNIT IN WATER. Rinse with dampened
cloth or sponge and wipe dry.
NOTE: When
time, you may no
your Sunbeam@ Pie for the first
ce a fine smoke haze being emitted. This is
normal and is due to the initial heating of the internal
components.
3. When using for the first time, “season” the non-stick plates to protect the surface.
Pre-heat the Sunbeam@ Pie for about 5 minutes. Season the plates by
applying a thin coat of oil onto the non-stick surfaces and rub with a paper towel.
Remove excess. Should sticking occur in later usage, or if a recipe specifies,
re-season your unit.
PREPARING PIES
Select a recipe and have all ingredients and dough crusts ready.
2. Use the special pie cutters provided to cut the pastry tops and bottoms for your
pies. The small cutter is for the top and the large is for the bottom. Position the
cutter on a flat sheet of pastry and cut out by pressing down into the pastry.
3. Pat dough into cavities.
4. Fill the crusts with your selected ingredients.
5. Place top crust on top of filling.
6. Close the unit and plug into outlet. Use only the voltage specified on the bottom of
the unit. The should illuminate indicating power is reaching and heating
your unit. This light will remain lit while the unit is plugged in.