If two cameras are both at the same address bit 1, you need to power
one of the units off in order to modify the PTZ address bit of the other.
Sunba dome cameras can set preset PTZ positions for which cameras can
memorize and travel directly by calling the preset. Preset Positions are
represented by numbers. You need to “add” a preset and then “call” it.
You can always“delete” them later.
Please
reboot the device
. After the self-diagnostic process of the camera.
The camera will then display the current address information on the screen
such as (ADDR = address):
How to double check the current PTZ address of the camera?
PTZ Preset Position
6. Preset and Patrol
Important:
Please change the
address number that
you just modified
for the corresponding
channel here.
PTZ Device RS485 Device
Channel
1
8
1
None
None
None
1
Pelco D
9600
8
1
1
9600
Protocol
Address
Baud Rate
Data Bits
Stop Bits
Parity
- 09 -
P T O L
C O M M
A U T O
P E L C O
A D D R
1