Sun Telecom SUN-HMS200, Руководство пользователя, Страница: 4 / 8

Fib e r O p tic Solut ions P rov ide r
1 / 4
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
1 Brief Introduction
Sun Telecom SUN-HMS200/400 handheld fiber optic microscope utilizes a
white light LED for coaxial illumination. Light is introduced into the optical
path (axis) so that it comes out the tip of the objective lens and strikes the
ferrule perpendicular to the end face. This method of illumination produces a
high level of resolution, providing excellent detail of scratches and
contamination.
2 Specification
Parameters Specifications
Models SUN-HMS200 SUN-HMS400
Optical Magnification 200X 400X
Power Requirements 3
“AAA” alkaline batteries
Light Source White LED, rated for 100,000 hours
Controls
Momentary on/off switch for light source and
fine-focus control wheel
Laser Safety Filter Built-in IR filter
Adapter Interface
2.5mm universal male adaptor and 1.25mm
universal male adaptor included
Weight (kg)
0.6
Dimensions (mm) 225 X 60 X 35
3 Setup
The Fiber Microscope comes fully assembled and requires only a few steps
before it is ready to use.
1) Begin by removing the instrument from its case.
2) You'll need to insert 3
“AAA” batteries. Unscrew and remove the "Battery
Cap”. Insert the batteries with the "-" side up towards the Battery Plug;
"+" side down towards the Light Switch (see Figure 2). Replace the
Battery Cap and tighten.
3) If you have purchased the Fiber Microscope with a Universal Adapter, it