NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
© 2014, Pinnacle Products International, Inc.
Halogen Infrared Heater User’s Manual
2
Safety Information
Turn the electrical power off at the electrical panel board (circuit breaker
or fuse box) and lock or tag the panel board door to prevent someone from
turning on the power while you are working on the heater. When using electrical appliances,
basic precautions should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
WARNING
–
Extreme caution is necessary when any
heater is used by or near children or invalids.
–
Do not use outdoors.
–
This heater is not intended for use in
bathrooms, laundry areas and similar indoor
locations. Never locate heater where it may
fall into a bathtub or other water container.
–
Do not use heater in wet or moist locations.
–
Always locate heater on a stable and level
surface.
–
Do not place the heater against paperboard or
low-density fiberboard surfaces.
–
ALWAYS use only the electrical power
(voltage and frequency) specified on the
model plate of the heater.
–
ALWAYS use only three-prong, grounded
outlet and extension cord.
–
ALWAYS unplug the heater when not in use.
–
ALWAYS install the heater so that it is not
directly exposed to water spray, rain, dripping
water, or wind.
–
Keep all combustible materials away from
this heater
Read all instructions before
using this heater.
WARNING
RISk OF ElECTRIC SHOCk!
WARNING
CAUTION! HOT WHILE
IN OPERATION. DO NOT
TOUCH. kEEP CHIlDREN, ANIMAlS,
CLOTHING AND COMBUSTIBLES AWAY
FROM HEATER.
WARNING
Minimum Clearance From Combustibles
SSR-820R-IHR
SSR-820G-IHR
Front
3 ft.
3 ft.
Top
1 ft.
1 ft.
Sides
1 ft.
1 ft.
Look for this icon throughout the manual for helpful tips on how to
assemble, use and clean your Halogen Infrared Heater.
