FIGURE 4
SAFETY PRECAUTIONS
1)
Use an independent 12V/24V DC outlet with a capacity of no
less than 12A. The appliance does not require grounding.
2)
If the unit is to be stored or left unused for prolonged periods,
please ensure that the unit is turned off and disconnected
from the power source. When reconnecting, please ensure that
connectors and power source is working order.
3)
Do not immediately switch the freezer on and off- it may result
in damage to the compressor module. Please ensure that the unit
remains in the off position for a minimum of 10 minutes prior to
turning the freezer back on.
4)
The appliance is a native 12/24v chest freezer.
Never
directly
connect the appliance to a AC power source as it will cause
permanent damage to the hardware.
5)
The supplier is not responsible for any damages or losses as a
direct result of failing to comply with the safety and standards
outlined in this manual. The supplier is also not responsible for
any accidents or damages as a result of an act of God.
CABLE REQUIREMENTS
To ensure the correct start and operating conditions for the unit,
the following cable dimensions must be observed:
Cross-section (mm
2
)
Max. Length between battery
and compressor module (m)
12V/DC 24V/DC
2.5 (10 AWG)
2.5
5
4 (6 AWG)
4
8
6 (2.5 AWG)
6
12
10 (3/0 AWG)
10
20
CIRCUIT DIAGRAM
NORTH AMERICAN TOLL FREE :
1
(855)
230
-
4008
NORTH AMERICAN TOLL FREE :
1 (855) 230 - 4008
