11
Cable Guide Installation
1. Installing Cable Tie
Thread #25 Cable Tie over the #17 Quick Release Seat Pin and zip it onto the pin. Trim the tie and route the derailleur cable through the eye
of the cable tie. See Figure R.
Pedal Installation
1. Installing Pedals
a. Apply grease to the threads of the pedal spindle. This will protect both the threads of the pedal and crank arm over time.
Use pedal washers where required,
b. Using your hands, thread the pedal spindle into the crank arm by turning it toward the front of the bike. Once the threads
catch use your pedal wrench to finish tightening down the pedals. See Figure S.
c. Torque down the pedals to a minimum of 300 in-lbs of torque.
R
S
