R
Instructions for:
Hydrostatic Pump
Models:SPAW
CHU LUN SING CO.,LTD
Page:E1
1. SAFETY PRECAUTIONS
Fail to comply with the following cautions
and warnings could cause equipment
damage and personal injury.
IMPORTANT :
Minimum age of the
operator must be 18 years The operator
must have read and understood all
instructions, safety issues, cautions and
warnings before starting to operate the
SUN RUN equipment. The operator is
responsible for this activity towards other
persons.
WARNING :
To avoid personal injury and
possible equipment damage, make sure all
hydraulic components withstand the
maximum pressure of 700 bar(10,000psi).
!
WARNING :
Do not overload equipment.
Overloading cause equipment failure and
possible personal injury. The cylinders are
designed for a max. Pressure of 700 bar
(10,000psi).
WARNING:
Always wear safety glasses.
The operator must take precaution against
injury due to failure the tool or workpiece.
!
DANGER:
NEVER
set the relief valve to a
higher pressure than the maximum rated
pressure of the pump. Higher settings may
result in equipment damage and/ or personal
injury. Do not remove relief valve.
WARNING:
Stay clear of loads supported
by hydraulics. A cylinder, when used as a
load lifting device, should never be used as
a load holding device. After the load has
been raised or lowered, it must always be
blocked mechanically.
WARNING:
USE ONLY RIGID PIECES TO
HOLD LOAD. Carefully select steel or wood
blocks that are capable of supporting the
load. Never use a hydraulic cylinder as a
shim or spacer in any lifting or pressing
application.
DANGER:
To avoid personal injury
keep hands and feet away from cylinder
and workpiece during operation.
WARNING :
The system operating pressure
must not exceed the pressure rating of the
lowest rated component in the system. Install
pressure gauges in the system to monitor
operating pressure. It is your window to what
is happening in the system.
CAUTION:
Avoid sharp bends and kinks
that will cause severe back-up pressure in
hoses. Bends and kinks lead to premature
hose failure.
DO NOT
drop heavy objects on hose. A
sharp impact may cause internal damage to
hose wire strands. Applying pressure to a
damaged hose may cause it to rupture.
IMPORTANT:
Do not lift hydraulic
equipment by the hoses or couplers. Use
the carrying handle or other means of safe
transport.
CAUTION :
KEEP HYDRAULIC
EQUIPMENT AWAY FROM FLAMES AND
HEAT. Excessive heat will soften packings
and seals, resulting in fluid leaks. Heat also
weakens hose materials and packings. For
optimum performance do not expose
0
0
equipment to temperatures of 65 C(150 F)
or higher. Protect hoses and cylinders from
weld spatter.
DANGER:
Do not handle pressurized
hoses. Escaping oil under pressure can
penetrate the skin causing serious injury. If
oil is injected under the skin, see a doctor
immediately.
Содержание SPAQ-130-700F
Страница 2: ...SPAW C1 R 700 bar 10 000psi 700 bar 10 000psi 0 0 65 C 150 F...
Страница 6: ...3 1 2 3 4 SPAW C5 R 100...
