Sun Oracle Sun Storage 6000 Series, Руководство по модернизации оборудования

Страница: 8 / 18

2 6000 Series Hardware Upgrade Guide • December 2010
Note – If you have any problems during this upgrade, contact customer support.
For support information, see
http://www.sun.com/support/
.
▼
Turn Off the Power
1. Stop all I/O activity to the modules.
Wait for all data communications to cease before turning off the power. Refer to
the Cache Active LED description in the installation guide for more information.
2. Turn off the power switch [1] on each controller module.
3. Turn off the power switch on each drive tray I/O module.
FIGURE 1
6540 Controller Tray AC Power Switch and AC Power Connector
▼
Remove and Label Cables
1. At the AC power connector [2], disconnect the two power cords from the
controller tray (one from each controller module). See
FIGURE 1
.
2. Disconnect and label (as necessary) FC and management cables from the
controller tray.
Identify the controller (A or B) and the host port that each cable connects to.
Controller A is on top, and controller B is on the bottom.
Figure Legend
1 AC power switch 2 AC power connector