Sun Oracle Sun Blade 6048, Примечания к продукту

Страница: 17 / 42

Chapter 2 Hardware Notes and Issues 9
Hardware Issues
This section describes hardware issues for the Sun Blade 6048 modular system.
■
“Important Caution for Chassis Midplane Replacement” on page 9
■
“NEM LEDs (6713414)” on page 11
■
“Power Supply Connections (6615994) (6576346)” on page 11
■
“Power Supply Watt Meter Feature Not Available for A231 Power Supplies
(6614183)” on page 12
■
“Power Consumption Is Invalid in ILOM if PSU Side Is Under 25A (6438921)” on
page 12
Important Caution for Chassis Midplane
Replacement
When replacing a chassis midplane, follow the sequence listed below to avoid
damage to the midplane. Refer to the
Sun Blade 6048 Modular System Service Manual
for detailed instructions on removing and installing a midplane.
To replace the chassis midplane:
1. Remove the chassis midplane.
2. Pull off the gasketing material attached to the left and right sides of the chassis.
See
FIGURE 2-1
and
FIGURE 2-2
for the positions of the gasketing material in the
chassis.
3. Install the new midplane.
Do not re-install the gasketing material.
Caution – Thermal damage to the chassis can occur. Failure to remove the
gasketing material prior to installing the midplane might result in damage to
chassis.