Sun Oracle Netra SPARC T3-1B, Руководство по обслуживанию

Страница: 43 / 136

Detecting and Managing Faults 31
3. Clear the fault from all persistent fault records.
In some cases, even though the fault is cleared, some persistent fault information
remains and results in erroneous fault messages at boot time. To ensure that these
messages are not displayed, type the following Oracle Solaris command:
For the UUID in the example shown in Step 2 , type:
4. Use the
clear_fault_action
property of the FRU to clear the fault.
Related Information
■
“Oracle Solaris PSH Technology Overview” on page 26
■
“PSH-Detected Fault Example” on page 27
■
“Clear PSH-Detected Faults” on page 30
Managing Faults (POST)
These topics explain how to use POST as a diagnostic tool.
■
“POST Overview” on page 32
■
“Oracle ILOM Properties That Affect POST Behavior” on page 33
■
“Configure How POST Runs” on page 35
■
“Run POST With Maximum Testing” on page 37
■
“Interpret POST Fault Messages” on page 39
■
“Clear POST-Detected Faults” on page 40
■
“POST Error Message Syntax” on page 42
Related Information
■
“Diagnostics Overview” on page 5
■
“Diagnostics Process” on page 7
# fmadm repair
UUID
# fmadm repair 21a8b59e-89ff-692a-c4bc-f4c5cccca8c8
-> set /SYS/MB clear_fault_action=True
Are you sure you want to clear /SYS/MB (y/n)? y
set ’clear_fault_action’ to ’true