Sun Oracle Fire X4470, Руководство по установке

Страница: 37 / 76

Chapter 4 Post Installation of Windows Server 2008 27
6. In the Driver Installation Pack dialog, click
Finish
.
The System Settings Change dialog appears.
Note –
If you plan on installing Supplemental Software (highly recommended), do
not restart your system at this time. Once the supplemental software has been
installed, you will be prompted to restart the system.
7. Perform one of the following:
■
If you accepted the default installable settings in Step 2 , click
No
to proceed
to “Installing Supplemental Software” on page 27 .
■
If you are not installing the Supplemental Software , click
Yes
to restart your
computer.
Installing Supplemental Software
There are several Supplemental Software components available for your Sun Fire
X4470 server. You have two options for installation:
■
Typical . Installs all Supplemental Software applicable for your server.
■
Custom . Installs only the Supplement Software selected for installation.
TABLE 4-1
identifies the optional Supplemental Software components available for
your server.
TABLE 4-1
Install Pack Optional Supplemental Software
Available Supplemental Software Components
Servers With LSI
Integrated RAID
Controller
Servers With Intel
Integrated Disk
Controller
LSI MegaRAID Storage Manager , click
Yes
to restart your
computer
Enables you to configure, monitor, and maintain RAID on the SAS
internal RAID host bus adapter.
Typical Not applicable
IPMItool command-line utility
The IMPItool command-line utility reads the sensor data repository
(SDR) and displays sensor values, system event log (SEL), and field-
replaceable unit (FRU) inventory information; gets and sets LAN
configuration parameters; and performs chassis power control
operations via the BMC (also called the service processor (SP).
Typical Typical