Sun Microsystems XVR-600, Инструкция по установке и эксплуатации

Страница: 45 / 72

25
C H A P T E R
4
Configuring Multiple Frame Buffers
This chapter describes procedures for setting up multiple frame buffers.
■
“Configuring Multiple Frame Buffers Through the
Xservers
File” on page 25
■
“Xinerama” on page 27
Configuring Multiple Frame Buffers
Through the
Xservers
File
To run more than one frame buffer you must modify your
Xservers
file:
/etc/dt/config/Xservers
. The Sun XVR-600 graphics accelerator device name
is
jfb
(for example,
jfb0
and
jfb1
for two Sun XVR-600 graphics accelerator
devices). To do this:
1. Become superuser and open the
/etc/dt/config/Xservers
file.
If the
/etc/dt/config/Xservers
file does not exist, create the
/etc/dt/config
directory and copy the
Xservers
file from
/usr/dt/config/Xservers
to
/etc/dt/config.
# cd /etc/dt/config
# vi + Xservers
# mkdir -p /etc/dt/config
# cp
/usr/dt/config/Xservers /etc
/dt/config
# cd /etc/dt/config
# vi + Xservers