Sun Microsystems Ultra 80, Примечание к продукту, Страница: 8 / 12

6 Sun Ultra 80 Product Note • February 2000
8. With even pressure, firmly push down simultaneously on both upper corners of
the DIMM until the bottom edge of the DIMM (the edge with the gold pads) is
firmly seated into the slot.
Note –
Do not rock the DIMM into place.
Ensure that all contacts engage at the same time.
You will hear a “click” when the DIMM is properly seated.
The following illustration shows the incorrect and correct ways to seat the DIMM
(
FIGURE 3
).
FIGURE 3
Correct DIMM Seating
9. Install two DIMMs on the memory riser assembly and two DIMMs on the
motherboard.
Incorrect:
Corners Not Evenly Seated Correct:
Corners Evenly Seated