Sun Microsystems Ultra 5, Руководство по обслуживанию

Страница: 113 / 258

6-1
C H A P T E R
6
Major Subassemblies
This chapter describes how to remove and replace the major subassemblies.
This chapter contains the following topics:
■
Section 6.1 “Power Supply” on page 6-1
■
Section 6.2 “Cable Assemblies” on page 6-4
■
Section 6.3 “Speaker Assembly” on page 6-10
■
Section 6.4 “CPU Fan Assembly” on page 6-12
■
Section 6.5 “Front Bezel” on page 6-14
6.1 Power Supply
To remove and replace the power supply, proceed as follows.
6.1.1 Removing the Power Supply
1. Power off the system, remove the system cover, and attach an antistatic wrist strap
as described in Chapter 5.
Caution –
Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
2. Remove the power supply as follows (
FIGURE 6-1
):
a. Disconnect the power cable connectors from the following:
■
CD-ROM drive
■
Diskette drive