Sun Microsystems Ultra 24, Руководство по установке, Страница: 22 / 45

Chapter 2 Configuring the Preinstalled Solaris OS and Using Preinstalled Developer Software 2-3
FIGURE 2-1
Installation Flow Diagram
2.1.4 Configuring the Preinstalled Solaris 10 OS
Use a copy of
TABLE 2-1
to write down the information that you might need to collect
before setting up the Solaris 10 OS.
To help you fill out the information in the table, your system administrator (SA)
should provide you with information specific to your site before you begin. Check
with your SA about whether some of the information is available on your network.
TABLE 2-1
Information for Preinstalled Solaris 10 OS Configuration
Setup Window Explanation and Notes Your Information
Select Language
and Locale Native language and locale to use for the
workstation.
Host Name A name to give the workstation.
Terminal Type Type of terminal to use on the workstation.
Power on the system.
Yes
Section 1.7, “Powering the
Workstation On and Off” on
page 1-9
For instructions, refer to Appendix C ,
the Sun Ultra 24 workstation Operating
System Installation Guide , and the
documentation for your OS.
Section 2.1.4, “Configuring the
Preinstalled Solaris 10 OS” on page 2-3
No
Install a
different OS
from other
media.
Use a
preinstalled
version of
software?
Configure the Solaris 10 OS.
Explore developer software.
START
READY TO WORK!
Section 2.2, “Exploring Preinstalled
Developer Software” on page 2-5