Sun Microsystems Sun XVR-200, Руководство по установке

Страница: 23 / 60

Chapter 2 Installing the Software and Hardware 7
Software Package Names
TABLE 2-3
lists the Sun XVR-200 software package names and descriptions.
Installing the Sun XVR-200 Software
If necessary, see Appendix E for keyboard and mouse installation references.
1. Boot your system at the
ok
prompt.
Boot your system to the
ok
prompt by using the procedures outlined in your server
installation guide. If you have not already set up your server, you need to use the
integrated service console with the server. After you have been able to successfully
boot the server and log in as superuser, go to Step 2.
2. As superuser, check if the Sun XVR-200 graphics accelerator is already on your
system.
To do this, type:
3. Insert the Sun XVR-200 graphics accelerator CD-ROM into the drive.
■
If the drive is already mounted, type the following, and go to Step 4:
■
If the CD-ROM is not already mounted, type:
TABLE 2-3
Solaris Package Names
Package name Description
TSImkox
64-bit system software and device driver
TSImkow
Window system support
TSImkomn
Manual pages
ok boot
# /usr/bin/pkginfo | grep mko
# cd /cdrom/cdrom0
# mount -F hsfs -O -o ro /dev/dsk/c0t6d0s0 /cdrom
# cd /cdrom