Sun Microsystems Sun StorEdge Availability Suite 3.2, Руководство по устранению неисправностей

Страница: 50 / 52

40 Sun StorEdge Availability Suite 3.2 Software Troubleshooting Guide • December 2003
Update failed
PITC One or more volumes in a group copy or update
command failed. Possible errors:
EFAULT
: The kernel module tried to read out-of-
bounds. File a bug against
iiadm.
ENOMEM
: The kernel module ran out of memory.
EINVAL
: User is performing a shadow-to-master copy,
but two or more shadows are of the same master.
DSW_EIO
: The kernel had a problem reading or writing
one of the volumes in the set.
Update of %s failed
PITC Same as
Update failed
meaning but for a specific
volume.
Update of config failed
PITC During a reset,
iiadm
tried to update the
configuration file to indicate that the set is now online,
but failed to do so.
Version failed
PITC iiadm queried the kernel for the version of the code it
was running, but failed. Possible errors:
EFAULT
: The kernel module tried to read out-of-
bounds. File a bug against
iiadm
<vol> is already configured as an
SNDR bitmap
RM The master, shadow, or bitmap volume in the
ndr_ii
entry is already configured as a remote mirror bitmap
volume.
<vol> is not a character device
RM The volume specified is not a character device.
Volume is not in an InstantImage
group
PITC A volume specified on the command line does not
belong to a point-in-time copy set.
Volume is part of an InstantImage
group
PITC The user attempted to initialize an overflow volume,
but the volume is in use as a master, shadow, or
bitmap
volumes and bitmaps must not match
RM The same volume has been specified for both the data
volume and the bitmap volume.
TABLE 3-1
Error Messages for the Sun StorEdge Availability Suite 3.2 Software (Continued)
Error Message From Meaning