Sun Microsystems Sun Storage J4400, Руководство по замене

Страница: 8 / 21

4 Sun Storage J4400 Array Chassis Replacement Guide • April 2008
Caution – Do not twist the tab or pull it in any direction other than parallel with
the connector body. If the tab breaks, use a small sharp object (such as a fine-tipped
screwdriver) to lift the metal spring at the top of the connector shell to unlatch it (see
FIGURE 1
).
Caution – Electrical Shock Hazard. The power supplies in this equipment can
produce high energy hazards. Only instructed personnel with authorized access to
this equipment can remove and replace modules in the system.
a. Loosen the two captive thumb screws on the power supply ejection levers
and swing the ejection levers fully outward to partially eject the power
supply from the tray (
see
FIGURE 2
).
b. Pull the power supply out of the tray.
c. Place the power supply aside.
FIGURE 2
Removing a Power Supply