Sun Microsystems Sun Java System Directory Server Enterprise Edition 6.0, Руководство по миграции

Страница: 83 / 148

Migrating Directory Proxy Server
There is no automatic migration path to move from a previous version to Directory Proxy
Server 6.0. Directory Proxy Server 6.0 provides much more functionality than previous
versions. While a one to one mapping of configuration information is therefore not possible in
most instances, it is possible to configure Directory Proxy Server 6.0 to behave like a version 5
server for compatibility.
This chapter describes how the configuration properties in Directory Proxy Server 6.0 can be
used to simulate a version 5 configuration.
The chapter covers the following topics:
■
“Mapping the Global Configuration” on page 83
■
“Mapping the Connection Pool Configuration” on page 87
■
“Mapping the Groups Configuration” on page 88
■
“Mapping the Properties Configuration” on page 97
■
“Mapping the Events Configuration” on page 103
■
“Mapping the Actions Configuration” on page 104
■
“Configuring Directory Proxy Server 6.0 as a Simple Connection-Based Router” on page 104
Mapping the Global Configuration
Before you change the Directory Proxy Server 6.0 configuration, back up the configuration by
using the
dpadm backup
command. For more information, see
dpadm
(1M).
You can configure Directory Proxy Server 6.0 by using the Directory Service Control Center
(DSCC) or the
dpconf
command-line utility. For more information, see
dpconf
(1M).
Directory Proxy Server 6.0 configuration can be retrieved as a set of properties. For example,
information about the port is returned in the
listen-port
property. This section describes how
to map the version 5 global configuration attributes to the corresponding properties in
Directory Proxy Server 6.0, where applicable. Not all functionality can be mapped directly.
6
C H A P T E R 6
83
Sun Confidential: Registered