Sun Microsystems Sun GlassFish Enterprise Server 2.1 Скачать руководство пользователя страница 166

Страница: 166 / 256

[#|2006-10-21T13:25:53.852-0400|INFO|sun-appserver9.1|javax.enterprise.

system.core|_ThreadID=13;|CORE5004: Resource Deployed:

[cr:jms/DurableConnectionFactory].|#]

In this example,

■

and

mark the beginning and end of the record.

■

The vertical bar (

) separates the record fields.

■

2006-10-21T13:25:53.852-0400

specifies the date and time.

■

The

Log Level

INFO

. This level may have any of the following values:

SEVERE

WARNING

INFO

CONFIG

FINE

FINER

, and

FINEST

■

The

ProductName-Version

sun-glassfish-comms-server1.0

■

The

LoggerName

is a hierarchical logger namespace that identifies the source of the log

module, in this case

javax.enterprise.system.core

■

The

Key Value Pairs

are key names and values, typically a thread ID such as

_ThreadID=14;

■

The

Message

is the text of the log message. For all Enterprise Server

SEVERE

and

WARNING

messages and many

INFO

messages, it begins with a message ID that consists of a module

code and a numerical value (in this case,

CORE5004

The log record format might be changed or enhanced in future releases.

The Logger Namespace Hierarchy

The Enterprise Server provides a logger for each of its modules. The following table lists the
names of the modules and the namespace for each logger in alphabetical order, as they appear
on the Log Levels page of the Admin Console (see

“Configuring Log Levels” on page 168

). The

last three modules in the table do not appear on the Log Levels page.

TABLE 17–1

Enterprise Server Logger Namespaces

Module Name

Namespace

Admin

javax.enterprise.system.tools.admin

Classloader

javax.enterprise.system.core.classloading

Configuration

javax.enterprise.system.core.config

Connector

javax.enterprise.resource.resourceadapter

CORBA

javax.enterprise.resource.corba

Deployment

javax.enterprise.system.tools.deployment

EJB Container

javax.enterprise.system.container.ejb

About Logging

Sun GlassFish Enterprise Server 2.1 Administration Guide • December 2008

166

Содержание Sun GlassFish Enterprise Server 2.1

































































































































































































































































Результаты поиска

Содержание Sun GlassFish Enterprise Server 2.1

Отзывы:

Похожие инструкции для Sun GlassFish Enterprise Server 2.1

Бренды по названию

Популярные бренды

Sun Microsystems Sun GlassFish Enterprise Server 2.1, Руководство администратора

Результаты поиска

Содержание Sun GlassFish Enterprise Server 2.1

Отзывы:

Похожие инструкции для Sun GlassFish Enterprise Server 2.1

Бренды по названию

Популярные бренды