Sun Fire X4150 Server Product Notes
49
b. Run the
install.sh
script on the Tools and Drivers CD.
See the
Sun Fire X4150 Server Operating System Installation Guide,
820-1853, for
additional instructions on running the
install.sh
script for Solaris.
Linux Issues
The following issues apply to Sun Fire X4150 servers running the supported Red Hat
or SUSE Linux operating systems.
■
“Need to Install LSI Driver on SLES Systems Manually” on page 49
■
“Keystrokes Auto-Repeat” on page 49
■
“Mounting a Virtual USB Drive in RHEL5” on page 50
Need to Install LSI Driver on SLES Systems
Manually
LSI drivers need to be manually installed on SLES systems.
▼
Installing the LSI Drivers Manually
1. Locate and download the LSI drivers from the Tools and Drivers CD.
a. Go to the
\drivers\linux\RAID\LSI\drivers
directory.
b. Copy the
RHEL4_SLES9.tar.gz
or
RHEL5_SLES10.tar.gz
file to your
system.
c. Unzip and untar the file and locate the
mptlinux-
xxx
.rpm
file.
2. Use the
rpm -i mptlinux
-
xxxxx
.rpm
to install the driver.
The command
install.sh
will not install this driver.
Keystrokes Auto-Repeat
When typing characters on a Linux operating system running on the Sun Fire X4150
server, the keystrokes will auto-repeat. You can use the following workaround or
install an updated kernel from Red Hat, see RHSA-2006:0710-7 at the following URL: