Sun Microsystems Sun Fire V880z, Инструкция по установке и эксплуатации

Страница: 49 / 128

33
C H A P T E R
5
Configuring Multiple Frame Buffers
This chapter describes procedures for setting up multiple frame buffers.
■
“Configuring Multiple Frame Buffers Through the
Xservers
File” on page 33
■
“Xinerama” on page 35
Configuring Multiple Frame Buffers
Through the
Xservers
File
To run more than one frame buffer, you must modify your
/etc/dt/config/Xservers
file. The Sun XVR-4000 graphics accelerator device
name is
zulu
(for example,
zulu0
and
zulu1
for two Sun XVR-4000 graphics
accelerator devices). To do this:
1. Become superuser and open the
/etc/dt/config/Xservers
file.
If the
/etc/dt/config/Xservers
file does not exist, create the
/etc/dt/config
directory and copy the
Xservers
file from
/usr/dt/config/Xservers
to
/etc/dt/config.
# cd /etc/dt/config
# vi + Xservers
# mkdir -p /etc/dt/config
# cp /usr/dt/config/Xservers /etc/dt/config
# cd /etc/dt/config
# vi + Xservers