4
Sun Fire V60x and Sun Fire V65x Server Release Notes • July 2003
DHCP Configuration to Support PXE
Boot
If you are using the Solaris DHCP server, you must configure a separate DHCP
server for each subnet. Each DHCP server instance (per subnet) must be properly
configured for the client population that it serves.
USB Support
If you need to use a keyboard for initial boot-up and configuration of the server, you
must use a PS/2 keyboard. Do not connect a USB device to the server prior to
configuring or installing the Solaris operating environment.
A PS/2 keyboard is also required when using the Diagnostic CD or Service Partition
utilities.
After Solaris has been properly installed, you may use a USB keyboard and mouse.
The Solaris 9
uhci
driver is used for USB devices connected to the Sun Fire V60x
and V65x servers. USB support is limited to keyboard and mouse devices.
Console Redirection
If you wish to redirect the console output to the serial port, you must perform
configuration within both the server BIOS and the Solaris operating environment.
Refer to the Sun Fire V60x and Sun Fire V65x Server Solaris Operating Environment
Installation Guide for details.
