Sun Microsystems Sun Fire V440, Руководство по установке

Страница: 5 / 16

1
Sun Fire V440 Server Setup:
Cabling and Power On
This guide tells you how to route the cables and cords and power on the Sun Fire
V440 server. Use this guide after you have installed the Sun Fire V440 server into a
rack, following instructions either on the server’s top panel or in the
Sun Fire V440
Server Installation Guide . The illustrated instructions in this guide are a continuation
of the the rackmount instructions on the Sun Fire V440 server top label. All
installation instructions in full detail are included in the
Sun Fire V440 Server
Installation Guide and the Cable Management Arm Installation Note .
You should have completed the following tasks:
■
Unpack the server
■
Transfer online documentation and read the Sun Fire V440 Server Product Notes
■
Rackmount the server
■
Install the cable management arm
This document provides an overview of the following tasks:
■
Locating the Back Panel Ports
■
Routing and Securing Cords and Cables
■
Connecting the Power Cords to the Server
■
Connecting the Ethernet Cables
■
Installing Optional Components
■
Setting Up a Console Device
■
Preparing to Configure the Primary Interface
■
Powering On the Server
■
Installing the Solaris Operating System and Other Software